Trang chủ » Accessories » 24-ch Relay Board with DIN-rail Mounting (24V) ICP DAS DB-24R/24/DIN

24-ch Relay Board with DIN-rail Mounting (24V) ICP DAS DB-24R/24/DIN

24-ch Relay Board with DIN-rail Mounting (24V)

Chia sẻ:
Model: DB-24R/24/DIN
Views: 795

24-ch Relay Board with DIN-rail Mounting (24V) ICP DAS DB-24R/24/DIN

The DB-24R consists of 24 form C, electromechanical relays for efficient switching of load by programmed control . The contact of each relay can control a 0.5 A /110 V load or 1A / 24VDC . The relay is energized by applying a 5 voltage signal to the appropriate relay channel on the 50-pin Opto-22 compatible connector or D-Sub 37 connector . Twenty-four enunciator LEDs, one for each relay, light when their associated relay is activated . To avoid overloading your PC’s power supply, this board needs a +12VDC or +24VDC external power supply.
  • On/off control
  • Energy management
  • Test Automation
  • Process Control
Relay Output
Channels 24 x FORM C
Type 24V Signal Relay
Contact Rating 0.5 A @ 120 VAC, 1 A @ 24 VDC
Operate Time 6ms
Release Time 3ms
Electrical Endurance 2 x 10^5
Mechanical Endurance 2 x 10^7
Power
Input Range 24 VDC
Consumption 200 mA @ 24 V
Mechanical
Dimensions (mm) 220 mm x 132 mm
Installation DIN-rail mounting
Environment
Operating Temperature 0 ~ 60°C
Storage Temperature -20 ~ 70°C
Humidity 5% to 90 % noncondensing
DB-24R/24/DIN     CR  24-ch Relay Board with DIN-rail Mounting (24V) (RoHS)
Include: CA-5015 (Flat Cable, 50-pin, 1.5 M)
TOP HOME