Trang chủ » Accessories » Bo mạch DIO 24 kênh đầu vào số cách ly OPTO với Din-rail ICP DAS DB-24P/DIN CR

Bo mạch DIO 24 kênh đầu vào số cách ly OPTO với Din-rail ICP DAS DB-24P/DIN CR

24-ch OPTO-Isolated Input Board with DIN-rail Mounting

Chia sẻ:
Model: DB-24P/DIN CR
Views: 629

Bo mạch DIO 24 kênh đầu vào số cách ly OPTO với Din-rail ICP DAS DB-24P/DIN CR

The DB-24P is a 24 channel isolated digital input daughter board for DIO24,DIO48,DIO144 ,PIO-D144,OPTO-22 Compatible digital input board,The optically isolated inputs of the DB-24P consist of a bi-directional opto-couple with a resistor for current sensing . You can use the DB-24P to sense DC signal from TTL levels up to 24V. You can also use DB-24P to sense a wide range of AC signals. The DB-24 P registers a constant logic high if the frequency of the input AC signal is greater or equal to 1 kHz, and if the voltage of the AC signal is at least 4Vrms. If you are using AC input signal ,you must short the AC filter Jumper. You can use the board to isolate the computer from large common-mode voltages ,ground loops, and voltage spikes that often occur in industrial environments.
Digital Input
Channels 24
Response Speed 20us without filter / 2.2ms with filter
Wet Contact, ON Voltage Level 2.8 V ~ 24 V(Max)
Wet Contact, OFF Voltage Level 1 V (Max)
Input Impedance 1.2K Ohm
Power
Consumption +5 V@290 mA
Mechanical
Dimensions (mm) 213 mm x 132 mm
Installation DIN-rail mounting
Environmental
Operating Temperature 0 ~ 60°C
Storage Temperature -20 ~ 70°C
Humidity 5% to 90 % noncondensing
  • On/off control
  • Energy management
  • Test Automation
  • Process Control
DB-24P/DIN     CR 24-ch OPTO-Isolated Input Board with DIN-rail Mounting (RoHS)
Include: CA-5015 (Flat Cable, 50-pin, 1.5 M)

 

TOP HOME