Trang chủ » Truyền thông công nghiệp » Thiết bị ghi dữ liệu Can Bus 1 cổng ICP DAS CAN-Logger100 CR

Thiết bị ghi dữ liệu Can Bus 1 cổng ICP DAS CAN-Logger100 CR

1-port CAN Bus Data Logger Device

features

Thiết bị ghi dữ liệu Can Bus 1 cổng ICP DAS CAN-Logger100 CR

• Compatible with CAN specification 2.0 parts A and B
• 2500 Vrms photocoupler isolation on the CAN side
• Full compatible with the ISO 11898-2 standard
• Supports CAN bus acceptance filter configuration
• Max. CAN data flow for a single channel is 15000 fps
• Programmable CAN bus baud rate from 10 kbps ~ 1Mbps
• USB 2.0 High Speed Compatibility
• Supports 4 to 32 GB SDHC type flash for saving CAN messages
• Built-in jumper for the 120 Ω terminal resistor of the CAN side
• Power by the USB port or CAN port
• 3 kV galvanic isolation for the CAN port
• Provides a configuration utility that can be used to transmit/receive CAN messages

Chia sẻ:
Model: CAN-Logger100 CR
Views: 679

Thiết bị ghi dữ liệu Can Bus 1 cổng ICP DAS CAN-Logger100 CR

The CAN-Logger100 are high-performance intelligent CAN bus data logger device with one/two CAN port that can help to make data collection and to process on a CAN bus network easier and quicker. The powerful CPU of the CAN-Logger devices provide the accurately time-stamp for each CAN message and supports storage media like SD or SDHC type flash for saving these CAN messages that is useful to analysis and diagnostic the CAN Bus network. The CAN-Logger devices use the standard USB HID driver of the Windows system.

 

  • Control System
  • Building Automation
  • Factory Automation
  • Distributed data acquisition
Data Logger
Trigger Log continuously
Time Stamp 10 us
Storage Media SDHC type flash – support 4 to 32 GB
File Format Binary
Configuration Utility tool
LED Indicators
Status 1 x Power
1 x Module status
1 x SD status
3 x CAN status
USB
Specification USB 2.0 High Speed
Transfer Speed 480 Mbit/s, High Speed mode
Connector 1 x USB (Type B) (Utility port)
Driver Built-in Windows 7/8.1/10
CAN
Ports 1
Baud Rate 10 k ~ 1 M bps
Isolation 3000 VDC for DC-to-DC, 2500 Vrms for photocoupler
Terminal Resistor DIP switch for the 120 Ω terminal resistor
Specification ISO-11898-2, CAN 2.0A and CAN 2.0B
Filter Yes
Pin Assignment 1 x 5-Pin male M12
Data Flow 15000 fps for Rx
Power
Input Range +10 VDC ~ +30 VDC or USB power delivery
Consumption 2.5 W
Mechanical
Casing Metal
Dimensions (mm) 102 x 102 x 44 (W x L x H)
Installation Wall Mount
Environment
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing

  • CAN 2.0A or CAN 2.0B specification selection
  • CAN Bus baud rate and acceptance filter configuration
  • Easy to transmit/receive CAN messages and check CAN Bus state
  • CAN Bus communication mode (normal and silent mode ) configuration
  • Data filter function for logged data
CAN-Logger100     CR 1-port CAN Bus Data Logger Device (RoHS)
Datasheet Documents
TOP HOME