Trang chủ » Truyền thông công nghiệp » Module CANopen Slave 8 kênh đầu vào số (DI) + 8 kênh đầu ra số (DO) ICP DAS CAN-2055C CR

Module CANopen Slave 8 kênh đầu vào số (DI) + 8 kênh đầu ra số (DO) ICP DAS CAN-2055C CR

CANopen Slave Module of 8-ch Isolated Digital Input and 8-ch Isolated Digital Output

Chia sẻ:
Model: CAN-2055C CR
Views: 784

Module CANopen Slave 8 kênh đầu vào số (DI) + 8 kênh đầu ra số (DO) ICP DAS CAN-2055C CR

CANopen is one kind of the network protocols based on the CAN bus and mainly used for embedded network of machine control, such as industrial machine control , aircraft engines monitoring, factory automation, medical equipment control, remote data acquisition, environmental monitoring, and packaging machines control, etc. CAN-2055C module follows the CiA-301 version 4.02 and CiA-401 version 2.1. You can access the digital I/O status and set the configuration by using standard CANopen protocol. CAN-2055C has passed the validation of the CiA CANopen conformance test tool. Therefore, you can use it with standard CANopen master easily by applying the EDS file. CAN-2055C has 8 isolated sink/source input channels and 8 isolated source output channesl, It can be used to various applications, such as PNP, NPN, TTL, relay contact and so forth. By owing to the CANopen masters of ICP DAS, you can quickly build a CANopen network to approach your requirements.

CPU Module
Watchdog Timer Hardware watchdog
LED Indicators
Status 3 LEDs to PWR, RUN and ERR
Digital Input
Channels 8
Type Wet Contact
Sink/Source (NPN/PNP) Sink/Source
ON Voltage Level +3.5 ~ +30 VDC
OFF Voltage Level +1 VDC Max
Input Impedance 3kΩ, 0.3W
Digital Output
Channels 8
Type Open emitter
Sink/Source (NPN/PNP) Source
Load Voltage +10 ~ +30 VDC
Load Current 700mA, each channel
Intra-module Isolation 3750 Vrms
CANopen
Baud Rate 10 k ~ 1 M
Isolation 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Terminal Resistor Built-in 120Ω
Protocol CiA 301 v4.02, CiA 401 v2.1
Node ID 1 ~ 99
No. of PDOs 10 RxPDO , 10 TxPDO
PDO Mode Event-triggered, remotely-requested, Cyclic and acyclic SYNC
Error Control Node Guarding protocol / Heartbeat Producer
NMT Slave
EMCY Message Yes
Power
Consumption 1.7 W
Mechanical
Dimensions (mm) 33 x 99 x 78 ( W x L x H )
Installation DIN-Rail
Environment
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
CAN-2055C     CR  CANopen Slave Module of 8-channel Isolated (Wet) DI, 8-channel Isolated (Source, PNP) DO (RoHS)
TOP HOME