Trang chủ » Truyền thông công nghiệp » Module CANopen Slave 10 kênh đầu vào tương tự (AI) Universal ICP DAS CAN-2019C/S CR

Module CANopen Slave 10 kênh đầu vào tương tự (AI) Universal ICP DAS CAN-2019C/S CR

CANopen Slave Module of 10-ch Universal Analog Input

Chia sẻ:
Model: CAN-2019C/S CR
Views: 671

Module CANopen Slave 10 kênh đầu vào tương tự (AI) Universal ICP DAS CAN-2019C/S CR

CAN-2019C module follows the DS-301 version 4.02 and DSP-401 version 2.1. You can access the thermocouple input status and set the configuration by using standard CANopen protocol. CAN-2019C has passed the validation of the CiA CANopen Conformance Test tool. Therefore, you can use it with standard CANopen master easily by applying the EDS file. The CAN-2019C is a 10-channel universal analog input CANopen slave module with voltage and current input types. It provides extremely accurate thermocouple measurement and automatically cold-junction compensation for each channel. By owing to the CANopen masters of ICP DAS, you can quickly build a CANopen network to approach your requirements.

CPU Module
Watchdog Timer Hardware watchdog
LED Indicators
Status 3 LEDs to PWR, RUN and ERR
Analog Input
Channels 10 (Differential)
Sensor Type +/- 15mV, +/- 50mV, +/- 100mV, +/- 500mV, +/- 1V, +/- 2.5V, +/- 5V, +/- 10V
+/-20mA,(Requires Optional External 125 Ohm Resistor)
Thermocouple (J, K, T, E, R, S, B, N, C)
Resolution 16-bit
Accuracy +/-0.1% FSR
Sampling Rate 10 Samples/Sec. (Total)
Input Impedance >400 kΩ
Common Mode Rejection 86 dB Min.
Normal Mode Rejection 100 dB
Overvoltage Protection 240 Vrms
Individual Channel Configuration Yes
Open Wire Detection Yes
Zero Drift +/- 10 μV/ °C
Span Drift +/-25 ppm/ °C
Isolation 3000 VDC
CANopen
Baud Rate 10 k ~ 1 M
Isolation 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Terminal Resistor Built-in 120Ω
Protocol CiA 301 v4.02, CiA 401 v2.1
Node ID 1 ~ 99
No. of PDOs 10 RxPDO , 10 TxPDO
PDO Mode Event-triggered, remotely-requested, Cyclic and acyclic SYNC
Error Control Node Guarding protocol / Heartbeat Producer
NMT Slave
EMCY Message Yes
Power
Consumption 1.5 W
Mechanical
Dimensions (mm) 33 x 99 x 78 ( W x L x H )
Installation DIN-Rail
Environment
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
Type Code Temperature Range (°C)
J -210 °C ~ +1200 °C
K -270 °C ~ +1372 °C
T -270 °C ~ +400 °C
E -270 °C ~ +1000 °C
R -50 °C ~ +1765 °C
S -50 °C ~ +1765 °C
B 0 °C ~ +1820 °C
N -270 °C ~ +1300 °C
C 0 °C ~ +2320 °C
CAN-2019C/S     CR CANopen Slave Module of 10-ch Universal Analog Input. Include CAN-2019C module and a DB-1820 daughter board. (RoHS)
TOP HOME