Trang chủ » Quản lý năng lượng thông minh » Thiết bị đo điện thông minh 3 pha 60A EtherNet/IP ICP DAS PM-3133i-100P-EIP CR

Thiết bị đo điện thông minh 3 pha 60A EtherNet/IP ICP DAS PM-3133i-100P-EIP CR

EtherNet/IP, Isolated 3-phase power meter; includes 60A CT

Features

• Bi-directional Energy
• True RMS Power Measurements
• Energy Analysis for 3P4W, 3P3W, 1P3W, 1P2W
• Current Measurements Up to 400 A with Different CT Ratio
• Isolated Voltage Measurements Up to 600 V
• Clip-on CT for Easy Installation
• W Accuracy Better than 0.5% (PF=1)
• Total Harmonic Distortion (THD)

Chia sẻ:
Model: PM-3133i-100P-EIP CR
Views: 8947

ICP DAS brings the most powerful, cost-effective, advanced Smart Power Meters PM-3133i series that gives you access to real-time electric usage for three-phase power measurement. With its high accuracy (<0.5%, PF=1 ), the PM-3133i series can be applied to both low voltage primary side and/or medium/high voltage secondary side and enables the users to obtain reliable and accurate energy consumption readings from the monitored equipments in real time under operation. These compact size and cost-effective power meters are equipped with revolutionary wired clip-on CT (various types, support input current up to 400 A). Built-in AC isolator protection, this means total isolation between the AC measurement side and the control side. It operates over a wide input voltages range 10 ~ 600 VAC which allows worldwide compatibility.

• Generator monitoring
• Switchgear distribution systems
• Energy Management

 

AC Power Measurement
Wiring 3P4W-3CT, 3P3W-2CT, 3P3W-3CT, 1P2W-1CT, 1P3W-2CT
Loops 3-phase: 1
1-phase:
3 @ 1P2W-1CT
1 @ 1P3W-2CT
Input Voltage 10 ~ 600 V; built-in isolation transformer
Input Current PM-3133i-100P-EIP: CTØ10 mm (0.05 A ~ 60 A)
PM-3133i-160P-EIP: CTØ16 mm (0.1 A ~ 100 A)
PM-3133i-240P-EIP: CTØ24 mm (0.15 A~200 A)
PM-3133i-360P-EIP: CTØ36 mm (0.3 A~300 A)
PM-3133i-400P-EIP: CTØ36 mm (0.3 A~400 A)
Input Frequency 50/60 Hz
W Accuracy Better than 0.5% (PF=1)
Power Parameter Measurement True RMS voltage (Vrms), True RMS current (Irms), Active Power (kW), Active Energy (kWh), Apparent Power (kVA), Apparent Energy (kVAh), Reactive Power (kVAR), Reactive Energy (kVARh), Power Factor (PF), Frequency
Data Update Rate 1 Second
Ethernet
Ports 1 x RJ-45, 10/100 Base-TX
Protocol EtherNet/IP
Power
Input Range +12 ~ 48 VDC
Consumption 2 W
Mechanical
Casing Plastic
Dimensions (mm) 33 x 127 x 100 (W x L x H)
Installation DIN-Rail Mounting
Environment
Operating Temperature -20 ~ +70 °C
Storage Temperature -25 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
PM-3133i-100P-EIP     CR  EtherNet/IP, Isolated 3-phase power meter; includes 60A CT (Inside diameter 10 mm; wire lead 4 m) x 3 (RoHS)
Datasheet Download Center
TOP HOME