Thiết bị đo và hiển thị điện thông minh 3 pha Ethernet Modbus TCP ICP DAS PM-2133DP-MTCP CR

Modbus TCP, 3-phase power meter with LED display; supports 333 mV CTs, not for Rogowski coils

Chia sẻ:
Model: PM-2133DP-MTCP CR
Views: 1066

The PM-2133DP series is suitable for low-voltage primary-side and medium/high-voltage secondary-side applications, allowing users to obtain reliable and accurate energy consumption data, as well as perform real-time equipment monitoring and control. It supports an input voltage range of 10 to 500 VAC, making it compatible with international voltage standards. Equipped with an LED display, the PM-2133DP can be installed on the surface of distribution panels, enabling administrators to easily monitor key power parameters such as voltage, current, power, energy, and power factor throughout the power distribution process. The PM-2133DP does not include current transformers (CTs) by default. Users can select CTs with 333 mV output specifications to meet a variety of application requirements. However, Rogowski coils are not supported.

• Generator monitoring
• Switchgear distribution systems
• Energy Management

AC Power Measurement
Wiring 3P4W-3CT, 3P3W-2CT, 3P3W-3CT, 1P2W-1CT, 1P3W-2CT
Loops 3-phase: 1
1-phase:
3 @ 1P2W-1CT
1 @ 1P3W-2CT
Input Voltage 10 ~ 500 V
Input Current Supports 333 mV output CTs; actual current range depends on CT’s primary rating
Input Frequency 50 Hz (Range 45 ~ 55 Hz)/60 Hz (Range 55 ~ 65 Hz)
W Accuracy Accuracy is approximately 2–5% (PF = 1), depending on the CT used. The CT ratio must be set correctly
Power Parameter Measurement True RMS voltage (Vrms), True RMS current (Irms), Active Power (kW), Active Energy (kWh), Apparent Power (kVA), Apparent Energy (kVAh), Reactive Power (kVAR), Reactive Energy (kVARh), Power Factor (PF), Frequency (45 ~ 65 Hz)
Data Update Rate 1 Second
LED Display Yes, 8-digit
Ethernet
Ports 1x RJ45, 10/100 Base-TX
Protocol Modbus TCP
Power
Input Range +85 ~ + 264 VAC (277 VAC available)
Consumption 6 W
Mechanical
Casing Plastic
Dimensions (mm) 110 x 115 x 50 (W x L x H)
Installation Panel Mounting
Environment
Operating Temperature -20 ~ +70 °C
Storage Temperature -25 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
PM-2133DP-MTCP     CR  Modbus TCP, 3-phase power meter with LED display; supports 333 mV CTs, not for Rogowski coils (RoHS)
TOP HOME