Trang chủ » IIoT » IO/Sensor » iWSN Environmental Sensing Module » Thiết bị đo điện thông minh không dây iWSN 3 Pha 2 Loop 1000A ICP DAS iWSN-9603-RCT1000P-ME-IP33 CR

Thiết bị đo điện thông minh không dây iWSN 3 Pha 2 Loop 1000A ICP DAS iWSN-9603-RCT1000P-ME-IP33 CR

iWSN Wireless 3-phase 2-loop power meter, includes 1000A Rogowski CT

Chia sẻ:
Model: iWSN-9603-RCT1000P-ME-IP33 CR
Views: 1018

The iWSN-9603-RCT500P-ME-IP module is a 3-phase AC power meter, which provides one 3-phase voltage input and two 3-phase 500A Rogowski current CT inputs, and suits measuring the power information of different equipment powered by the same AC source. By means of wireless communication and powering from the measured voltage cable, it can greatly reduce the cost and duration of installation, and satisfy to the demand of distributed deployment and quick setup. Moreover, the features of Sub-GHz radio frequency and data supplement mechanism effectively improve the reliability of the wireless communication especially in the crowed or seriously shielded space of the factory environment. Consider the maintenance and installation issues, the module is configured by the DIP switches, and uses special housing with IP33 protection to avoid the circuit short while the fire sprinkler system is activated if the module is located out of the panel box. Through the design of RTC and data timestamp, The iWSN-9603-RCT500P-ME-IP can fit the power saving applications, such as machine and process power efficiency improvement, power information administration, calculation of carbon emission, predictive maintenance, and big data analysis of power consumption.

  • Machine and process power efficiency improvement
  • Power information administration
  • Calculation of carbon emission
  • Predictive maintenance
  • Big data analysis of power consumption

EMS Protection
EFT (IEC 61000-4-4) +/- 500 V
ESD (IEC 61000-4-2) +/- 4 kV Contact
LED Indicators
Status 1 x Power
1 x Tx
1 x Error
AC Power Measurement
Wiring 3P4W-3CT, 3P3W-2CT, 3P3W-3CT, 1P2W-1CT, 1P3W-2CT
Loops 4(Single Phase)/ 2(Three Phase)
Input Voltage 100 – 480 VAC (58 – 277 VAC single phase)
Input Current iWSN-9603-RCT500P-ME-IP33: CTØ55 mm (5A ~ 500 A)
iWSN-9603-RCT1000P-ME-IP33: CTØ80 mm (5 A ~ 1000 A)
iWSN-9603-RCT2000P-ME-IP33: CTØ105 mm (5 A ~ 2000 A)
Input Frequency 50/60 Hz
Wh Accuracy Better than 2% (PF=1)
Condition:
Input current > 50A; (For -500P, -1000P)
Input current > 200A; (For -2000P)
Power Parameter Measurement True RMS voltage (Vrms), True RMS current (Irms), Active Power (kW), Active Energy (kWh), Power Factor (PF), Frequency
Data Update Rate 1, 10, 30, or 60 Seconds
RF
Channels 0 ~ 15
Group ID 0 ~ 3
Radio Frequency 433.1000 ~ 434.6000 MHz
Transmission Power 9±1dBm (PA Off) / 18±1dBm (PA On)
Transmission Distance (LoS) 100 m
Node ID 1 ~ 31
Working Duty 1, 10, 30, or 60 Seconds
Antenna
Type Built-in Omni-directional antenna
Power
Consumption 3W
Input Type Three phase 100 – 480 VAC
(58 – 277 VAC single phase)
Mechanical
Dimensions (mm) 85 x 184 x 47 (W x L x H)
Installation Wall-mount
Ingress Protection Rating IP33
Environment
Operating Temperature -30 °C ~ +50 °C
Storage Temperature -40 °C ~ +55 °C
Humidity 10 ~ 90% RH, Non-condensing
iWSN-9603-RCT1000P-ME-IP33     CR  iWSN Wireless 3-phase 2-loop power meter, includes 1000A Rogowski CT (Inside diameter 80 mm; wire lead 4 m) x 6 (RoHS)
TOP HOME