I-7532RM-FD is a local CAN/CAN FD (CAN with Flexible Data-Rate) bridge used to establish a connection between two CAN/CAN FD networks. It can increase the bus loading capacity, extend communication distance, connect CAN/CAN FD networks with different baud rate and support messages transform between CAN and CAN FD networks. I-7532RM-FD supports messages transform from CAN to CAN, CAN to CAN FD, CAN FD to CAN and CAN FD to CAN FD. Besides, It also supports frame mapping rule, merging rule(combine multiple CAN messages to one CAN FD message) and splitting rule (split one CAN FD message to multiple CAN messages) for some specific messages transformation. Users can freedom to use these rules for their application. After connecting USB port with PC, user can use Utility tool to configure module’s baud rate and rules. Then user can simple and easy to use the module.
| LED Indicators |
| Status |
1 x Power
1 x USB status
2 x CAN status |
| USB |
| Specification |
USB 2.0 High Speed (480Mbps) |
| Connector |
1 x USB (Type C) |
| Driver |
Built-in Windows 7/8.1/10/11 |
| CAN |
| Ports |
2 |
| Specification |
ISO 11898-2, CAN 2.0 A/B and FD |
| Baud Rate |
CAN bit rates: 10 k ~ 1 M bps,
CAN FD bit rates for data field: 100 k ~ 10 M bps (*Note1)
Bit rate setting via rotary switch and utility tool |
| Isolation |
3000 VDC for DC-to-DC, 2500 Vrms for photo-coupler |
| Terminal Resistor |
Switch for 120Ω terminal resistor |
| Filter |
Yes |
| Receive Buffer |
128 frames |
| Time Delay |
[ 1Mbps (8-byte Data) ] ID-29bit => 160 us, ID-11bit => 142 us ;
[ 10Kbps (8-byte Data) ] ID-29bit => 13.8 ms, ID-11bit => 12 ms |
| Data Flow |
10,000 FPS (each port) |
| Power |
| Input Range |
+10 VDC ~ +30 VDC |
| Consumption |
1.2 W |
| Mechanical |
| Casing |
Metal |
| Dimensions (mm) |
102 x 120 x 37.5 (W x L x H) |
| Installation |
Wall Mount or DIN-Rail |
| Environment |
| Operating Temperature |
-25 ~ +75 °C |
| Storage Temperature |
-30 ~ +80 °C |
| Humidity |
10 ~ 90% RH, Non-condensing |
Specification Memo
Note1: The maximum CAN FD data rate can be exceeded depending on the concrete operating conditions (cable length, network topology, settings,…), but it can also not be reached.
