Bộ chuyển đổi cách ly RS-232 sang RS-422/485 ICP DAS I-7520A CR

Isolated RS-232 to RS-422/485 Converter

Chia sẻ:
Model: I-7520A CR
Views: 5060

Most industrial computer systems provide standard RS-232 serial ports. Though widely accepted, RS-232 has limited transmission speed, range, and networking capabilities. The RS-422 and RS-485 standards overcome these limitations by using differential voltage lines for data and control signals, which transparently converts RS-232 signals into isolated RS-422 or RS-485 signal with no need to change any hardware or software. The I-7520A lets you easily build an industrial grade, long-distance communication system using standard PC hardware.

The design of the isolation between the I-7520/A and the I-7520R/AR is different. If the user wants to supply power from the PLC/PC, the I-7520R/AR should be used, otherwise the isolation will be broken. Refer to the I-7000 bus converter manual for detailed information.

How to choose the isolation side ?
1. Most circuit damage is caused by the noise from power input.
2. Consider the devices connected to which side are more expensive, choose this side isolated.

I-7520: RS-232 isolated (devices at RS-232 side are protected)
I-7520R: RS-485 isolated (devices at RS-485 side are protected)
I-7520A: RS-232 isolated (devices at RS-232 side are protected)
I-7520AR: RS-422/485 isolated (devices at RS-422/485 side are protected)

I-7520 and I-7520R

I-7520A and I-7520AR

Models I-7520 I-7520R I-7520A I-7520AR
Serial Interface RS-232 TxD, RxD, GND
RS-422 – TxD+, TxD-, RxD+, RxD
The RS-422 and RS-485 cannot be used simultaneously
RS-485 Data+, Data-
Transfer Distance Max. 1,200 m at 9.6 kbps; Max. 400 m at 115.2 kbps
(Belden 9841 2P twisted-pair cable, if different cables are used, the transmission distance may change)
Self-Tuner Asic Inside Yes
Speed 300 ~ 115200 bps
ESD Protection Yes
3000 VDC Isolation on CH1 ~ CH4 on RS-232 side on RS-485 side on RS-232 side on RS-485 side
Connection RS-232 9-Pin Female D-Sub
RS-422/485 Removable 10-Pin Terminal Block
LED Indicators
Power/Communication Yes
Power
Input Voltage Range +10 VDC ~ +30 VDC (Non-isolated)
Power Consumption 1.2 W
Mechanical
Casing Plastic
Flammability Fire Retardant Materials (UL94-V0 Level)
Dimensions (W x H x D) 72 mm x 118 mm x 35 mm
Installation DIN-Rail
Environment
Operating Temperature -25 °C ~ +75 °C
Storage Temperature -30 °C ~ +75 °C
Humidity 10 ~ 90% RH, non-condensing
I-7520A     CR Isolated RS-232 to RS-422/485 Converter (Blue Cover) (RoHS)
GPSU06U-6 24 VDC/0.25 A, 6 W Power Supply
DIN-KA52F 24 VDC/1.04 A, 25 W Power Supply with Din-Rail Mounting
I-7510 CR Isolated RS-485 Repeater (RoHS)
I-7510A CR Isolated RS-422/485 Repeater (RoHS)
CA-0915 9-Pin Male-Female D-Sub Cable, 1.5 m
TOP HOME