Trang chủ » Module vào/ra tương tự/số kết nối RS-485/Ethernet » Module 2 cổng PoE Ethernet Modbus TCP 6 kênh AI + 2 kênh AO + 2 kênh DI + 2 kênh DO ICP DAS PET-7226 CR

Module 2 cổng PoE Ethernet Modbus TCP 6 kênh AI + 2 kênh AO + 2 kênh DI + 2 kênh DO ICP DAS PET-7226 CR

PoE Ethernet I/O Module with 2-port Ethernet Switch, 6-ch AI, 2-ch AO, 2-ch DI and 2-ch DO

Chia sẻ:
Model: PET-7226 CR
Views: 660

Module 2 cổng PoE Ethernet Modbus TCP 6 kênh AI + 2 kênh AO + 2 kênh DI + 2 kênh DO ICP DAS PET-7226 CR

The PET-7226 is a multi-function module with 6-channel analog inputs, 2-channel analog outputs, 2-channel digital inputs and 2-channel digital outputs. It provides various programmable analog inputs (+/-500 mV, +/-1 V, +/-5 V, +/-10 V, +/-20 mA, 0 ~ 20 mA and 4 ~ 20 mA), and analog outputs (+/-5 V, +/-10 V, 0 ~ 20 mA and 4 ~ 20 mA). Each analog input is allowed to configure a proper range with 240 Vrms high voltage protection. Each analog input/output can be programmed to accept current or voltage as input/output depending upon the position of corresponding jumper.

Tự động hóa tòa nhà, Tự động hóa nhà máy, Tự động hóa máy, Bảo trì từ xa, Chẩn đoán từ xa, Thiết bị kiểm tra.
CPU Module
Watchdog Timer Yes, Module (0.8 second), Communication (Programmable)
EMS Protection
EFT (IEC 61000-4-4) ±2 kV for Power Line
ESD (IEC 61000-4-2) ±4 kV Contact for Each Terminal
±8 kV Air for Random Point
Surge (IEC 61000-4-5) ±2 kV for Power Line
LED Indicators
Status 1 x Power, 2 x Ethernet, 16 x I/O, 1 x PoE
Software
Built-in Web Server Yes
Analog Input
Channels 6 (Differential)
Type Voltage
Current
Range ±500 mV, ±1V, ±5 V, ±10 V
+0 mA ~ +20 mA, ±20 mA, 4 ~ 20 mA (Jumper Selectable)
Resolution 16-bit
Accuracy Normal Mode: ±0.1%
Fast Mode: ±0.5% or better
Sampling Rate Normal Mode: 10 Samples/Second (Total)
Fast Mode: 50 Samples/Second (Total)
Input Impedance Voltage: 2 MΩ
Current: 125 Ω
Common Mode Rejection 86 dB Min.
Normal Mode Rejection 100 dB
Common Voltage Protection ±200 VDC
Overvoltage Protection 240 Vrms
Overcurrent Protection Yes, 50 mA at 110 VDC/VAC Max.
Individual Channel Configuration Yes
Open Wire Detection Yes, for 4 ~ 20 mA only
Zero Drift ±20 μV/°C
Span Drift ±25 ppm/°C
Isolation ±400 VDC, Virtual Channel to Channel Isolation
Analog Output
Channels 2
Type Voltage
Current
Range +0 VDC ~ +5 VDC, ±5 VDC, +0 VDC ~ +10 VDC, ±10 VDC
+0 mA ~ +20 mA, +4 mA ~ +20 mA (Jumper Selectable)
Resolution 12-bit
Accuracy ±0.1% of FSR
Open Wire Detection Yes, for 4 ~ 20 mA only
Voltage Output Capability 20 mA @ 10 V
Current Load Resistance 500 Ω
Individual Channel Configuration Yes
Power on Value Yes, Programmable
Safe Value Yes, Programmable
Digital Input/Counter
Channels 2
Wet Contact, ON Voltage Level +1 VDC Max.
Wet Contact, OFF Voltage Level +3.5 VDC ~ +30 VDC
Dry Contact, ON Voltage Level Close to GND
Dry Contact, OFF Voltage Level Open
Dry Contact, Effective Distance 500 Meters Max.
Max. Counts 4,294,967,295 (32-bit)
Frequency 100 Hz
Min. Pulse Width 5 ms
Overvoltage Protection 30 VDC
Digital Output
Channels 2
Type Isolated Open Collector
Sink/Source (NPN/PNP) Sink
Load Voltage +5 VDC ~ +50 VDC
Max. Load Current 700 mA/Channel
Overvoltage Protection 60 VDC
Overload Protection 1.4 A
Short-Circuit Protection Yes
Power on Value Yes, Programmable
Safe Value Yes, Programmable
Ethernet
Ports 2 x RJ-45, 10/100 Base-TX, Swtich Ports
PoE Yes
Security ID, Password and IP Filter
Protocol Modbus/TCP, Modbus/UDP
Power
Reverse Polarity Protection Yes
Consumption 5.2 W
Powered from PoE Yes, IEEE 802.3af, Class1
Powered from Terminal Block 12 ~ 48 VDC
Mechanical
Dimensions (mm) 76 mm x 120 mm x 38 mm (W x L x H)
Installation DIN-Rail or Wall mounting
Environmental
Operating Temperature -25 ~ +75°C
Storage Temperature -30 ~ +80°C
Humidity 10 ~ 90% RH, Non-condensing
PET-7226     CR PoE Ethernet I/O Module with 2-port Ethernet Switch, 6-ch AI, 2-ch AO, 2-ch DI and 2-ch DO (RoHS)
TOP HOME