So sánh sản phẩm
chọn tối đa 4 sản phẩm

WISE (Web Inside, Smart Engine)

Ngày đăng : 13:58:48 05-02-2016

About WISE

WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive HMI interface that allows users to implement control logic on controllers just a few clicks away; no programming is required. With this powerful and easy-to-use software, it will minimize the learning curve, shorten time to market and dramatically reduce the labor and cost spent on system development.

 

System Architecture

Through Web browser, users can access Web server on WISE controllers to perform tasks such as logic rule edition and download. An IF-THEN-ELSE rule engine will be set up to manage and deploy logic rules for controllers. The rule engine will check whether the rules are valid or not and determine the execution of actions under specific conditions, for examples: setting up I/O channel values, perform Timer/Schedule tasks or sending Email/SMS message under a specific condition. In addition, through Modbus TCP/RTU protocol, SCADA package enables control and monitoring of I/O channel or system status on WISE controller in real time.

WISE-580x(-MTCP)/WISE-52xx even provides more supports in I/O functions. It allows to connect to a wide range of ICP DAS remote I/O modules and Modbus TCP/RTU slave modules; enables to freely choose the most suitable I/O modules. With the microSD card, it provides Data Logger function to real-time record the I/O channel data of the controller and allows to send the data log files by FTP to the control center for further administration management or data analysis. In addition to the CGI command sending, WISE-52xx supports the CGI command receiving function that allows the Network devices (such as IP Camera) to trigger the operation of logic rule of WISE-52xx. The well-thought-out CGI command functions make WISE-52xx being able to interact with the Network devices (such as IP Camera) flexibly. WISE- 52xx also supports SNMP V2c, SNMP Trap, MQTT and DDNS. The flexible integration ability with the SCADA and IT software and the reliable ability of real-time I/O control make WISE-52xx the most cost-effective I/O controller in the IoT (Internet of Thing) Age.

 

WISE Features

   
IF-THEN-ELSE logic rules execution ability
 

WISE controller features an IF-THEN-ELSE logic rule engine, it offers up to 36 IF-THEN-ELSE rules for users to set up the logic content. After completing rule edition and downloading rules to the WISE controller, the rule engine will loop execute the rules in accordance with the execute order under specific conditions.

 
 
No extra software tool is required
 

WISE HMI interface runs on regular Web browsers. To edit control logic, it only requires a browser to connect to the Web server on WISE controller. No extra software tool installation is needed on the target PC.

 
 
No more programming
 

WISE provides user-friendly Web UI pages for editing control logic on the controllers. It enables to implement logic edition by a few clicks on the mouse to set up and deploy logic rules without writing a single line of code.

 
 
Offer various options for I/O channel settings
 

WISE offers various options for I/O channel settings; for example: noise filter for DI signals, deadband setting for AI signals, linear scale setting, temperature degree in Celsius or Fahrenheit setting, power on value setting for DO channel, pulse output setting and DI/DO counter setting, etc.

 
 
Provide Timer and Schedule operation
 

WISE features Timer and Schedule functions: It allows user to schedule specific date or time for control logic execution, or perform specific tasks such as time delay. With calendar user interface provided, Schedule setting can be more efficient and flexible

   
Real-time alarm notification & remote monitoring via SMS or Email
 

WISE supports SMS and Email functions for real-time message notification function. The message sending action can be added to the logic edition as part of logic control to provide real-time message notification to the related personnel when an event occurs.

   
Password protection for access control
 

WISE HMI web page offers password protection. After getting in the webpage, you will be required to input the password before editing logic rules. In addition, WISE provides monitoring web pages specifically designed for cell phone. The access control restricts the access to the webpage to prevent unauthorized modification; WISE-52xx allows to set up passwords for Administrator, User and Guest; only the authorized users will be allowed to review the setting, change the setting or modify the channel data.

 
 
Provide CGI Command Sending and Receiving functions
 

CGI command function is an important function for real-time message communication in network environment. WISE supports fully CGI command operations as CGI command sending and CGI command receiving. The CGI command sending action can be added to the logic edition as part of logic control in response to specific events. The CGI command receiving function let WISE can receive the CGI command from others network devices. The content of CGI command receiving can be used in IF condition statements to trigger the THEN/ELSE actions.
Note: Only WISE-52xx provides CGI Command receving function.

   
Support various protocols for seamless integration with SCADA and IT system
 

WISE controller supports various communication protocols to perform real-time monitoring and control of the controllers. The Modbus TCP/RTU protocol of WISE allows sharing I/O channel and system data with the SCADA system. WISE also support the SNMP V2c, SNMP Trap and MQTT protocol function for easy integration with the MIS system/Facility management system/Network management system. The flexible integration ability with the SCADA and IT system make WISE the most cost-effective I/O controller in the IoT (Internet of Thing) applications.
Note: Only WISE-52xx supports SNMP V2c, SNMP Trap and MQTT function.

 
 
Support Modbus TCP/RTU slave module (WISE-580x(-MTCP) and WISE-52xx only)
 

WISE-580x(-MTCP) and WISE-52xx allows to connect with devices that support Modbus TCP/RTU protocol for I/O monitoring. The ability to connect with Modbus TCP/RTU slave devices enables the flexibility and scalability for system implementation and allows to meet various requirements of the applications from the clients.
Note :
1. WISE-580x can connect to ICP DAS XW-Board, I-7000/M-7000 series modules, DL series modules or Modbus RTU slave modules.
2. WISE-580x-MTCP can connect to ICP DAS XW-Board, ET-7000/PET-7000 series modules, WISE-71xx series modules or Modbus TCP slave modules.
3. WISE-52xx can connect to ICP DAS XV-board, I-7000/DL modules, M-7000/tM/DL/LC/SC/IR modules, WISE-7100/(P)ET-7000/WF-2000 modules and Modbus TCP/RTU slave modules.

   
Data Logger operation (WISE-580x(-MTCP) and WISE-52xx only)
 

With the microSD card, WISE provides Data Logger function to real-time record the I/O channel data of the controller and sends the data files by FTP to the control center for further administration management or data analysis.

 
 
Active I/O sending function (WISE-580x(-MTCP) and WISE-52xx only)
 

In addition to the Modbus TCP/RTU slave function that enables SCADA software (or HMI device) to poll the I/O channels data of the WISE controller, now WISE provides “Active I/O sending” function. Based on the “Active I/O sending” function, WISE allows to send the I/O channels data of the controller actively to SCADA software (or HMI device) by event trigger (I/O channel data changed) or periodic cycle. This function will improve the efficiency of the data communication between WISE controller and SCADA software (or HMI device).
Note: The SCADA software (or HMI device) must provides Modbus TCP slave function to receive the I/O channels data sent by WISE-580x(-MTCP) or WISE-52xx.

   
Real-time receive and execute SMS command (WISE-5801(-MTCP) only)
 

WISE-5801(-MTCP) is equipped with SMS command receiving function. It allows to receive the SMS commands sent by specific phones numbers to perform tasks such as real-time I/O channel value monitoring, I/O channel value modification and logic rules execution (triggered by SMS), etc.

   
Recipe function for grouping a series of actions (WISE-71xx, WISE-790x and WISE-580x only)
 

In addition to 3 THEN actions and 3 ELSE actions settings WISE provides for each rule, Recipe function is provided for easily grouping a series of actions. In addition to 3 THEN actions and 3 ELSE actions settings WISE provides for each rule, Recipe function is provided for easily grouping a series of actions.

   
Advanced P2P function between WISE controllers (WISE-71xx and WISE-790x only)
 

WISE offers P2P function that enables WISE controllers to directly communicate with other remote WISE controllers on networks. The controllers can freely share their status information such as I/O channel value, DI/DO counter or Internal Register to each others. The P2P operations can be incorporated into WISE logic rules as condition statements or action statements for condition evaluation criteria or action executions.

Tags: